FRONT-MOUNTED VENETIAN BLINDS

External lamela blinds type “Cetta”

C-80 and C-65 external blinds have a classical, curved C-shape with reinforced edges on both sides. They can shade out up to 85% of sunlight, thus preventing interior overheating. The seal in the guide rails allows them to run silently. The variants with a track in the guide rails are more resistant to strong winds and therefore less noisy than blinds on a lift cord.

 

ADVANTAGES OF C-65 EXTERNAL BLIND

•            Very good shading results (up to 85%)

•            Very quiet operation

•            Optional tilting on both sides

•            More resistant to wind thanks to  reinforced edges

•            Optional operation (crank/motor)

•            Slat guide options (cord/guiding rail) available

      

External lamela blinds type  "Zetta"

Z-type external blinds are technically the best types of external blinds available. Very modern Z-shape, allowing for complete closing of slats. They are functional and effective, and their functionalistic, angular shape fits very well into modern exteriors.

There are 2 types of Z  shaped slats Z-90 и Z-70 they have excellent interior shading results, and with their rolled seal they also efficiently eliminate noise. Technological excellence combined with angular, minimalist design – that is the Z-70 blind.

 

DIFFERENCES BETWEEN Z-90 AND Z-70

•            Slat width differs (Z-70=70 mm, Z-90=90 mm).

•            Z-70 has a denser slat arrangement, and the slats form a thicker packet.

•            Z-70 is suitable for places with narrow jambs.

ADVANTAGES OF Z-90

•            Fully sealable design

•            Excellent shading and darkening results

•            Noise-free operation and noise-eliminating seal

•            Very strong slats

•            Optional operation (crank/motor)

ADVANTEGES OF Z-70

•            Fully sealable design

•            Best shading results

•            Noise-free operation and noise-eliminating seal

•            Very strong slats

•            Optional operation (crank/motor)

  

OPERATING METHOD

•            Crank

•            Motor

Greater convenience can be achieved by connecting to automatic sun/wind controls.

External lamela blinds type "Setta"

The S-90 external blinds are truly among the best. They are a perfect combination of functionality, effectiveness and graceful design. They have excellent interior shading results, and with their rolled seal they, like the Z-shaped slats, also eliminate noise. In addition, they have an elegant, rounded S-shaped design. Their appearance is similar to that of roller blinds, which will be appreciated by those, who combine external blinds with roller blinds or roller doors on their house. If you are looking for a combination of elegant design and technological excellence, the S-90 blind is the right choice.

ADVANTAGES OF S-90

•            fully sealable design

•            best shading results

•            appearance similar to roller blinds – optional combination

•            noise-free operation and noise-eliminating seal

•            optional operation (crank/motor)

OPERATING METHOD

•            crank

•            motor

Greater convenience can be achieved by connecting to automatic sun/wind controls.

External lamela blinds type "Titan"

TITAN 90 is the absolute top product among the exterior blinds. The chain blind TITAN 90 is the exterior blind with safety elements which protects the facility from violent intrusion. The whole system including the slat shape was newly developed by the ISOTRA development workplace. All control and safety elements are not freely accessible (they are hidden in the guiding rails), which means that in the activated and enclosed state it prevents the blind handling from outsider.

The new special shape of the slat results in the slat inter-locking in enclosed state without leaving any gaps. This type of slat is controlled only by motor.

If the blind hits an obstacle during the downwards movement, the rest of the rolled blind remains in the obstacle position even after removing the obstacle (no free fall), and it also prevents manual handling of the blind upwards.

The exterior shading technology creates an optimal environment in terms of lighting and thermal conditions and is a key part of the construction in terms of energy savings. In the traditional concept, exterior shading fulfils the shading and security function, whereas in the non-traditional concept, they are an architectonic element of administrative buildings and adorn family houses.

Advantages and benefits 

• High level of resistance to violent intrusion,  
• high level of wind resistance,  
• self-supporting blind,  

• blinds using independent system for lifting and tilting of slats,  
• packet stopping in contact with any obstacle and the rest of the rolled blind remains in the obstacle position even after removing the obstacle, no free fall,  
• easy and quick replacement of damaged slats,  
• own technologies, including component production and rolling mills,  
• Modern design.  

Manner of control

• electrically – by remote control unit or switch

 

Guaranteed dimensions

• minimum width: 600 mm 
• maximum width: 2,800 mm* 
• maximum height: 4,000 mm  
• maximum area: 8 m2 

* Note: The wider the blind, the lower its wind resistance class – see Wind resistance, further down the page.

We do not make atypical designs.